adequa SANECOR® PVC pipe sewerage system

Maximum efficiency for sewerage systems

Applications

Urban sewerage systems, waste and rainwater collectors, interceptor collectors, outfalls, drains, etc. In general, conduits for the gravity-fed transportation of water and other liquids (industrial pipelines, replacement irrigation aquifers, etc).

Principal benefits

  • Complete and totally sealed sewerage system.
  • Very high rigidity values to withstand external loads in the short and long term.
  • Large interior diameters that guarantee optimum flow rates.
  • Sustainable products that ensure maximum energy efficiency throughout their entire life cycle.
  • Reliability and guarantee widely recognised in the marketplace.

Range

  • PVC pipes with structured double layer wall, smooth inside and corrugated outside: nominal diameters (in mm) DN160 – DN1200, in 6- and 3-m lengths. Nominal rigidity SN8 (≥8 kN/m2).
  • Special PVC parts for the entire range of diameters: sleeves, elbows, branches, extensions and covers. SN8 corrugated parts in DN630 to DN1200.
  • Connections using elastomer clips for the entire range of diameters, mechanical clips with elastic seal (DN160 and 200 in DN315 collectors), and junctions stuck at 45º and 90º for collectors of up to DN500. Cutters for producing DN160, 200 and 250 holes are also included.
  • Prefabricated inspection manholes with ready-installed rungs in diameters DN800, 1000 and 1200 and depths of up to 9m. The connections with the collector can be achieved using connectors inserted directly in the body of the manhole or using bases with inspection in the collector crown, straight or with a change of direction, and using pieces for a junction with full pass-through. Inspection traps and manholes in DN600 and DN800 are also included.
  • It is also possible to manufacture a wide range of made-to-measure traps and manholes for multiple applications: sample connections, grease separators, siphon traps, dropshafts, etc..

Characteristics

PHYSICAL AND CHEMICAL FEATURES
Density: 1.350 ÷ 1.520 kg/m3
Linear dilation coefficient: 8 x 10-5 m/m. ºC
Thermal conductivity: 0,13 kcal/m.h. ºC
Specific heat: 0,2 ÷ 0,3 cal/g.ºC
Vicat softening temperature: ≥79 ºC, according to standard UNE-EN 727:1997
pH limits: Between 3 and 9 at 20 ºC
Dichloromethane resistance: At 15 ºC, for 30 min. according to standard UNE-EN 580:2003
Oven test: In accordance with standard ISO 12091:1995
MECHANICAL FEATURES
Annular Rigidity (also called SCR =
Specific Circumferential Rigidity):
RCE ≥8 kN/m2, according to standard UNE-EN ISO 9969:2008
Creep coefficient at 2 years: ≤2,5, according to standard UNE-EN ISO 9967:2008. The actual value varies between 1.6 and 1.8
Impact strength: According to UNE-EN 744:1996 (Clock Sphere Method)
Annular flexibility 30% deformation in DN160 to D315, and 20% in DN400 to DN1200, according to standard UNE-EN ISO 13968:2009
HYDRAULIC SPECIFICATIONS
Sealing with internally pressurised elastomer joint Tests at 0.05 MPa with angular deviation and diametral deflection according to standard UNE-EN1277:2004
Sealing with elastomer joint in internal depression: Tests at -0.03 MPa with angular deviation and diametral deflection according to standard UNE-EN1277:2004
Equivalent roughness (Prandtl-Colebrook): K= 0.01 mm (for clean water)
K= 0.10 ÷ 0.25 mm (for waste water)
Sanecor

Catalogue

Download

 

Technical documentation

Download

Quality: standards and certification

AENOR Product Certificate No. 001/006430 in accordance with UNE-EN 13476

Download

IQNet Quality Management System certificate in accordance with ISO 9001

Download

IQNet Environmental Management System certificate in accordance with ISO 14001

Download